Wednesday, March 2, 2016

We Don't Need No Stinkin' Ruler!

Someone, somewhere on Pinterest printed out a load of Instagram photos, framed them, and made a rather fabulous photo wall with them.  I set out to do the same, only I didn't want to have to use a tape measure or a ruler to evenly space my frames.  The whole thing just screams of tediousness, and I'm not about that.  I wanted an easy, foolproof way to hang my photos.  I had my photos printed through Snapfish, but I've also used PostalPix.  Just use whichever printing service you like, as long as you can get good quality 4x4 prints.

Here's what I used:

  • Tiny Mighty Frames - I ordered these from Amazon in the 20-frame package.  It may look pricey at first, but once you tally up ordering twenty 4x4 wall frames individually, it's actually much less expensive.
  • 3M Command Strips - I used a value package of 4 medium and 6 large, then cut them all in half.
  • Graphing paper - I have a strange affinity for the stuff
  • Frog Tape or other painters tape
  • A level
  • A pencil
Lay out your frames on the floor before you hang them on the wall.  
The first thing I did was apply a vertical line of tape to the wall, making sure it was level.  Then I laid out the filled frames on the floor until I liked the composition.  I tried to make sure that I didn't have clusters of pictures that had either one or two people in them; I wanted to spread that out so that the image as a whole would look balanced.

This is what the wall should look like when you hang your first photo
Taking out my trusty graphing paper, I laid a sheet over the frames on the floor.  The spacing I had was about 4 blocks around each frame.  I traced a frame onto the graphing paper, moved it over 4 blocks, then traced another.  All four of the frames don't fit on the paper, but what you really need to take away from it is the idea that you're just graphing the spaces between the frames.  I had a space to the side of my frames due to the margin on the paper.  In hindsight, I could've just cut them off and aligned the frames with the tape.  Then I simply cut out the squares that the frames made and gave them to Emily to use for drawing paper.  I taped the graphed grid to the wall, making sure to line up the side of the paper with the tape line.  After level-checking the top of the graphing paper, I stuck a Command strip to the back of the first frame, lined it up with the opening in the graph paper, and stuck it on the wall.  I worked in blocks of 4, so that I had two frames over two frames before I moved the graphing paper.  


When your first block is done, move the graphing paper.
Realign it to the taped section and the frames above/beside.
Stand back every few rounds to make sure you're not off track, or that you don't have an off-kilter frame.  When you're done, stand back and admire!  I love that the photos can be switched out and changed by season, or holiday, or by whatever you feel like just by changing out a Command strip.

Here are a few views of what it looks like:

I posted this on Instagram the other day.
Lily was begging Liz for her coffee!
The view from the couch.  Art3mis seems to know whenever I'm trying to take a photo.
My pets are definitely hams!


View from the kitchen and dining room.
I like that I can see it from different rooms.
Also, we have plenty of amazing ideas, just no chalk at present!